Product Category: Räätälöidyt keskukset

R10279 UMK1120JAL-PT 80A, Paritalomittauskeskus - Surface

UMK1120JAL-PT 80A, Paritalomittauskeskus

UMK

OMA outdoor measurement centers are suitable as main and measurement centers for small properties and for temporary electrical distribution during construction. The centers are made from hot-dipped galvanized steel sheet, which, along with the correct design, ensures a sturdy and safe structure as well as usability. The delivery includes a main fuse sealing cover, tariff control fuse, necessary pass-throughs, Al/Cu connectors for input, and a rain roof. It is possible to add separately ordered interchangeable connectors for the output cables to the center.

Väri: RAL7024
Ue (V): 230/400
In (A): -
IP: 34
Icw: <10 kA
Materiaali: Ku-Si
Pääkytkin (A): -
JS 1nap C6: -
JS 1nap B10: -
JS 1nap C10: -
JS 1nap B16: -
JS 1nap C16: -
JS 1nap C20: -
JS 3nap C16: -
VVS 4nap 40A: -
VVS 2nap 40A: -
JS+VVS C16: -
Mittarien määrä max.: 1
Asennus: Surface

R10279 main diagram PDF

R10279 main diagram DWG

R10311 SMK1260P/U/92, Mittauskeskus uppo/pinta FE Pinta/Uppo

R10275 Pilot Light Surface

Pilot Light

UMK

OMA outdoor measurement centers are suitable as main and measurement centers for small properties and for temporary power distribution during construction. The centers are made of hot-dip galvanized steel sheet, which, together with the right design, ensures a sturdy and safe structure and usability. The delivery includes a main fuse sealing cover, tariff control fuse, necessary bushings, Al/Cu connectors for the input, and a rain roof. It is possible to add separately ordered change connectors for the output cables to the center.

Väri: RAL7024
Ue (V): 230/400
IP: 34
Icw: <10 kA
Materiaali: Ku-Si
Mittarien määrä max.: 1
Asennus: Surface

R10275 main diagram PDF

R10275 main diagram DWG

R10230 ITP1120U/84/0,24, Ryhmäkeskus-data uppo FE

ITP1120U/84/0,24, Ryhmäkeskus-data uppo FE

ITP

In ITP data group centers, IT and power distribution areas are stacked on top of each other. Along the side of the center, at the IT space, there is a cable shaft for the wiring of the power distribution part. This allows for easy connection of the feed cable from below.

The extensive furnishing possibilities in the IT space ensure that it meets the needs for various different purposes.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 481 x 1096
Väri: RAL9010

R10230 main diagram PDF

R10230 main diagram DWG

R10097 TPK-L, Työpaikkakeskus HST Surface

R10049 RKM840U-IT/0,24, Data-asennuskotelo FE -

RKM840U-IT/0,24, Data-asennuskotelo FE

RKM

RKM data cabinets are suitable for everything from smaller apartments to detached houses. The centers are made of white painted heat-treated steel sheet. The same RKM series also offers group centers for separate installation.

Available in both surface-mounted and flush-mounted types. The surface-mounted model includes the necessary through-entry flanges and a fixed back plate with a large through-entry blank. As a flush-mounted unit, the center projects only 4mm above the wall surface!

Ue (V): 230/400
In (A): -
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 481 x 817
Väri: RAL9010

R10049 main diagram PDF

R10049 main diagram DWG

R10239 RKS580P-IT/0,12, Data-asennuskotelo FE - Surface

RKS580P-IT/0,12, Data-asennuskotelo FE

RKS

The RKS series distribution center is best suited for smaller apartments and residential units. These models are specifically designed for tight renovation projects. The centers are made from white painted hot-dip galvanized steel sheet. The same RKS series also offers group centers for separate installation.

Available in both surface-mounted and flush-mounted versions. In the surface-mounted model, the back of the enclosure is open to allow cabling through the bottom.

Ue (V): 230/400
In (A): -
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10239 main diagram PDF

R10239 main diagram DWG

R10042 RKM560U/63, Ryhmäkeskus uppo FE

R10232 RKS750P/68, Ryhmäkeskus pinta FE Surface

RKS750P/68, Ryhmäkeskus pinta FE

RKS

Electrical centres in the RKS series are best suited for small residences and apartments. The models have been specifically designed for smaller renovation sites where space is at a minimum. The electric centres are made from hot galvanised steel plate that has been painted white. We also have data cabinets available in the same RKS series for separate installation. Available for both surface and flush mounting. In the surface-mounted model, the rear section of the cabinet is open for cabling through the bottom.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10232 main diagram PDF

R10232 main diagram DWG

R10234 RKS750P-IT/0,12, Data-asennuskotelo FE - Surface

RKS750P-IT/0,12, Data-asennuskotelo FE

RKS

The RKS series distribution center is best suited for smaller apartments and residential units. The models are specifically designed for tight renovation sites. The centers are made from white painted hot-dipped galvanized steel sheet. The same RKS series also offers group centers for separate installations. Available for both surface-mounted and flush-mounted installations. In the surface-mounted model, the back of the enclosure is open to allow for cabling through the bottom.

Ue (V): 230/400
In (A): -
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10234 main diagram PDF

R10234 main diagram DWG

R10166 ITK1120U/36/0,24, Ryhmäkeskus-data uppo FE

ITK1120U/36/0,24, Ryhmäkeskus-data uppo FE

ITK

The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit (only for a right-hand door). The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 350 x 1090
Väri: RAL9010

R10166 main diagram PDF

R10166 main diagram DWG

R10280 MKV1120JAL 80A, Varavoimakeskus - Surface

MKV1120JAL 80A, Varavoimakeskus

MKV

POK backup power centers are suitable as main and metering centers for small properties and for electrical distribution during construction. The centers are made from hot-dip galvanized steel sheet, which, together with the correct design, ensures a sturdy and safe structure as well as usability. Our range includes centers with nominal currents of 50A and 80A, all of which have an enclosure rating of IP34. Inquire from our sales department about backup power centers over 80A, which we implement in special center structures. Color shade RAL7024.

Väri: RAL7024
Ue (V): 230/400
In (A): -
IP: 34
Icw: <10 kA
Materiaali: Ku-Si
Pääkytkin (A): -
JS 1nap C6: -
JS 1nap B10: -
JS 1nap C10: -
JS 1nap B16: -
JS 1nap C16: -
JS 1nap C20: -
JS 3nap C16: -
VVS 4nap 40A: -
VVS 2nap 40A: -
JS+VVS C16: -
Mittarien määrä max.: 1
Asennus: Surface

R10280 main diagram PDF

R10280 main diagram DWG

R10277 UMK1120JAL-PT, Paritalomittauskeskus - Surface

UMK1120JAL-PT, Paritalomittauskeskus

UMK

OMA outdoor measurement centers are suitable as main and measurement centers for small properties and for temporary electrical distribution during construction. The centers are made from hot-dipped galvanized steel sheet, which, together with the correct design, ensures a sturdy and safe structure as well as usability. The delivery includes the main fuse sealing cover, tariff control fuse, necessary passages, Al/Cu connectors for the feed, and a rain roof. It is possible to add separately ordered change connectors for the output cables to the center.

Väri: RAL7024
Ue (V): 230/400
In (A): -
IP: 34
Icw: <10 kA
Materiaali: Ku-Si
Pääkytkin (A): -
JS 1nap C6: -
JS 1nap B10: -
JS 1nap C10: -
JS 1nap B16: -
JS 1nap C16: -
JS 1nap C20: -
JS 3nap C16: -
VVS 4nap 40A: -
VVS 2nap 40A: -
JS+VVS C16: -
Mittarien määrä max.: 1
Asennus: Surface

R10277 main diagram PDF

R10277 main diagram DWG

R10276 ACB - Surface

ACB

UMK

OMA outdoor measurement centers are suitable as main and measurement centers for small properties and for temporary power distribution during construction. The centers are made from galvanized steel sheet, which, combined with the correct design, ensures a sturdy and safe structure as well as usability. The delivery includes a main fuse sealing cover, a tariff control fuse, the necessary throughputs, Al/Cu connectors for the input, and a rain cover. It is possible to add separately ordered interchangeable connectors for the output cables to the center.

Väri: RAL7024
Ue (V): 230/400
In (A): -
IP: 34
Icw: <10 kA
Materiaali: Ku-Si
Pääkytkin (A): -
JS 1nap C6: -
JS 1nap B10: -
JS 1nap C10: -
JS 1nap B16: -
JS 1nap C16: -
JS 1nap C20: -
JS 3nap C16: -
VVS 4nap 40A: -
VVS 2nap 40A: -
JS+VVS C16: -
Mittarien määrä max.: 1
Asennus: Surface

R10276 main diagram PDF

R10276 main diagram DWG

R10271 RKV18, Ryhmäkeskus pinta Surface

R10238 RKS580P/42, Ryhmäkeskus pinta FE Surface

RKS580P/42, Ryhmäkeskus pinta FE

RKS

Electrical centres in the RKS series are best suited for small residences and apartments. The models have been specifically designed for smaller renovation sites where space is at a minimum. The electric centres are made from hot galvanised steel plate that has been painted white. We also have data cabinets available in the same RKS series for separate installation. Available for both surface and flush mounting. In the surface-mounted model, the rear section of the cabinet is open for cabling through the bottom.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10238 main diagram PDF

R10238 main diagram DWG

R10236 ITK840P/36/0,12, Ryhmäkeskus-data pinta FE Surface

ITK840P/36/0,12, Ryhmäkeskus-data pinta FE

ITK

The ITK840 data group centers are suitable for renovation. The open back allows for easy connectivity, even for cables brought through the base. The center can be installed either vertically or horizontally. For horizontal installation, we recommend the optional door holder set (for right-handed doors).

Extensive IT space furnishing options ensure needs for various applications. Available in both surface-mounted and flush-mounted versions.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10236 main diagram PDF

R10236 main diagram DWG

R10167 ITK1120P/36/0,24, Ryhmäkeskus-data pinta FE Surface

ITK1120P/36/0,24, Ryhmäkeskus-data pinta FE

ITK

The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit (only for a right-hand door). The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10167 main diagram PDF

R10167 main diagram DWG

R10320 ITP1000U/51+4/0,24, Ryhmäkeskus-data uppo FE Uppo/Pinta

R10290 MKV700, Varavoimakeskus - Surface

MKV700, Varavoimakeskus

MKV

POK backup power centers are suitable as main and metering centers for small properties and for temporary power distribution during construction. The centers are made of hot-dip galvanized steel sheet, which, combined with the correct design, ensures a sturdy and safe structure and usability. Our selection includes centers with nominal currents of 50A and 80A, all of which have an enclosure rating of IP34. For backup power centers over 80A, please inquire from our sales department about custom center configurations. Color shade RAL7024.

Väri: RAL7024
Ue (V): 230/400
In (A): -
IP: 34
Icw: <10 kA
Materiaali: Ku-Si
Pääkytkin (A): -
JS 1nap C6: -
JS 1nap B10: -
JS 1nap C10: -
JS 1nap B16: -
JS 1nap C16: -
JS 1nap C20: -
JS 3nap C16: -
VVS 4nap 40A: -
VVS 2nap 40A: -
JS+VVS C16: -
Mittarien määrä max.: 1
Asennus: Surface

R10290 main diagram PDF

R10290 main diagram DWG

R10312 ITP700-IT/0,24, Data-asennuskotelo FE Pinta/Uppo

R10285 MKV1120 80A, Varavoimakeskus - Surface

MKV1120 80A, Varavoimakeskus

MKV

POK backup power centers are suitable as main and metering centers for small properties and for temporary power distribution during construction. The centers are made from hot-dip galvanized steel sheet, which, along with the correct design, ensures a sturdy and safe structure as well as usability. Our range includes centers with nominal currents of 50A and 80A, all of which have an enclosure rating of IP34. For backup power centers over 80A, which are implemented in special center structures, please inquire from our sales department. Color shade RAL7024.

Väri: RAL7024
Ue (V): 230/400
In (A): -
IP: 34
Icw: <10 kA
Materiaali: Ku-Si
Pääkytkin (A): -
JS 1nap C6: -
JS 1nap B10: -
JS 1nap C10: -
JS 1nap B16: -
JS 1nap C16: -
JS 1nap C20: -
JS 3nap C16: -
VVS 4nap 40A: -
VVS 2nap 40A: -
JS+VVS C16: -
Mittarien määrä max.: 1
Asennus: Surface

R10285 main diagram PDF

R10285 main diagram DWG

R10243 ITK1120U/36/0,24/90mm, Ryhmäkeskus-data uppo FE

ITK1120U/36/0,24/90mm, Ryhmäkeskus-data uppo FE

ITK

ITK1120 series group centers are suitable for both new construction and renovation projects. The unit can be installed either vertically or horizontally. For horizontal installation, we recommend the optional door holder set (for right-handed doors).

The extensive IT room furnishing options ensure that the cabinet meets various uses. The cabinet protrudes only 4mm above the wall surface!

Väri: RAL9010
Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 350 x 1090

R10243 main diagram PDF

R10243 main diagram DWG

R10237 ITK1120P/48/0,12, Ryhmäkeskus-data pinta FE Surface

R10165 ITP1120U/80/0,24, Ryhmäkeskus-data uppo FE

ITP1120U/80/0,24, Ryhmäkeskus-data uppo FE

ITP

In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 481 x 1096
Väri: RAL9010

R10165 main diagram PDF

R10165 main diagram DWG

R10158 RKS750U/22/0,12, Ryhmäkeskus-data uppo FE

R10154 RKV24, Ryhmäkeskus pinta Surface

RKV24, Ryhmäkeskus pinta

RKV

The RKV group electric centres are appropriate for use as a lighting, heating or group electric centre in bathrooms. The plastic cabinets, which are classified according to IP54, are equipped with several feed-through holes that can be opened. The delivery includes a set of seals. If necessary, the cabinets can be combined with each other with an optional combination kit.

Ue (V): 230/400
IP: 54
Icw: <5 kA
Asennus: Surface
Väri: RAL7035

R10154 main diagram PDF

R10154 main diagram DWG

R10048 RKM840U/105, Ryhmäkeskus uppo FE

R10095 TPK-M, Työpaikkakeskus RST Surface

R10023 RKP48P, Ryhmäkeskus pinta - Surface

R10018 RKP12P, Ryhmäkeskus pinta - Surface

R10310 SMK980P/U/46, Mittauskeskus uppo/pinta FE Pinta/Uppo

R10267 ACB Uppo/Pinta

ACB

ITP

In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!

Väri: RAL9016
JS 1nap C20: -
Ue (V): 230/400
IP: 20C
Icw: <5kA
Materiaali: Ku-Si
Asennus: Uppo/Pinta

R10267 main diagram PDF

R10267 main diagram DWG

R10228 ITP840U/42/0,24, Ryhmäkeskus-data uppo FE

ITP840U/42/0,24, Ryhmäkeskus-data uppo FE

ITP

In the ITP data group centers, the IT and electrical distribution spaces are stacked. Along the side of the center, at the IT space, there is a cable chase for the wiring of the electrical distribution part. This allows for easy connection of, for example, the feed cable from below.

The extensive equipment possibilities in the IT space ensure the needs for many different applications.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 481 x 817
Väri: RAL9010

R10228 main diagram PDF

R10228 main diagram DWG

R10281 RKS500P/40, Ryhmäkeskus pinta FE Surface

RKS500P/40, Ryhmäkeskus pinta FE

RKS

Electrical centres in the RKS series are best suited for small residences and apartments. The models have been specifically designed for smaller renovation sites where space is at a minimum. The electric centres are made from hot galvanised steel plate that has been painted white. We also have data cabinets available in the same RKS series for separate installation. Available for both surface and flush mounting. In the surface-mounted model, the rear section of the cabinet is open for cabling through the bottom.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9016

R10281 main diagram PDF

R10281 main diagram DWG

R10268 ITP980U/46/0,24, Ryhmäkeskus-data uppo FE Uppo tai pinta

ITP980U/46/0,24, Ryhmäkeskus-data uppo FE

ITP

In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!

Väri: RAL9016
JS 1nap C20: -
Ue (V): 230/400
IP: 20C
Icw: <5kA
Materiaali: Ku-Si
Asennus: Uppo tai pinta

R10268 main diagram PDF

R10268 main diagram DWG

R10147 RKS750U/22, Mittauskeskus uppo FE

RKS750U/22, Mittauskeskus uppo FE

RKS

The RKS series distribution center is best suited for smaller apartments and housing units. The models are specifically designed for tight renovation projects. The centers are made of white painted, hot-dip galvanized steel sheet. The RKS series also includes Data enclosures for separate installation.

Available in both surface-mounted and flush-mounted models. In the surface-mounted model, the back of the enclosure is open to allow cabling through the base.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Mittarien määrä max.: 1
Upotusaukko (LxK): 237 x 714
Väri: RAL9010

R10147 main diagram PDF

R10147 main diagram DWG

R10161 ITP840U/40/0,24, Ryhmäkeskus-data uppo FE

ITP840U/40/0,24, Ryhmäkeskus-data uppo FE

ITP

In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 481 x 817
Väri: RAL9010

R10161 main diagram PDF

R10161 main diagram DWG

R10092 TPK-S, Työpaikkakeskus RST Surface

R10057 RKS500U/40, Ryhmäkeskus uppo FE

RKS500U/40, Ryhmäkeskus uppo FE

RKS

Electrical centres in the RKS series are best suited for small residences and apartments. The models have been specifically designed for smaller renovation sites where space is at a minimum. The electric centres are made from hot galvanised steel plate that has been painted white. We also have data cabinets available in the same RKS series for separate installation. Available for both surface and flush mounting. In the surface-mounted model, the rear section of the cabinet is open for cabling through the bottom.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 237 x 464
Väri: RAL9010

R10057 main diagram PDF

R10057 main diagram DWG

R10270 RKV9, Ryhmäkeskus pinta Surface

R10282 RKS500P-IT /0,12, Data-asennuskotelo FE - Surface

R10159 RKS750P/22/0,12, Ryhmäkeskus-data pinta FE Surface

R10040 RKM560P/63, Ryhmäkeskus pinta FE Surface

R10043 RKM560U-IT/0,24, Data-asennuskotelo FE -

R10036 RKM420P/42, Ryhmäkeskus pinta FE - Surface

R10019 RKP24P, Ryhmäkeskus pinta - Surface

R10155 RKV36, Ryhmäkeskus pinta Surface

RKV36, Ryhmäkeskus pinta

RKV

The RKV group electric centres are appropriate for use as a lighting, heating or group electric centre in bathrooms. The plastic cabinets, which are classified according to IP54, are equipped with several feed-through holes that can be opened. The delivery includes a set of seals. If necessary, the cabinets can be combined with each other with an optional combination kit.

Ue (V): 230/400
IP: 54
Icw: <5 kA
Asennus: Surface
Väri: RAL7035

R10155 main diagram PDF

R10155 main diagram DWG

R10164 ITP1120P/80/0,24,Ryhmäkeskus-data pinta FE Surface

ITP1120P/80/0,24,Ryhmäkeskus-data pinta FE

ITP

In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10164 main diagram PDF

R10164 main diagram DWG

R10153 RKV12, Ryhmäkeskus pinta Surface

RKV12, Ryhmäkeskus pinta

RKV

The RKV group electric centres are appropriate for use as a lighting, heating or group electric centre in bathrooms. The plastic cabinets, which are classified according to IP54, are equipped with several feed-through holes that can be opened. The delivery includes a set of seals. If necessary, the cabinets can be combined with each other with an optional combination kit.

Asennus: Surface
Väri: RAL7035
Ue (V): 230/400
IP: 54
Icw: <5 kA

R10153 main diagram PDF

R10153 main diagram DWG

R10096 TPK-M, Työpaikkakeskus HST Surface

R10038 RKM420U/42, Ryhmäkeskus uppo FE -

RKM420U/42, Ryhmäkeskus uppo FE

RKM

The RKM group electric centres are suitable for use from the smallest apartments to large detached houses. The electric centres are made from hot galvanised steel plate that has been painted white. We also have data cabinets available in the same RKM series for separate installation.

Ue (V): 230/400
In (A): -
IP: 20
Icw: <5kA
Materiaali: Ku-Si
Pääkytkin (A): -
JS 1nap C6: -
JS 1nap B10: -
Upotusaukko (LxK): 481 x 397
Väri: RAL9010

R10038 main diagram PDF

R10038 main diagram DWG

R10078 TPK-S, Työpaikkakeskus FE Surface

R10046 RKM840P/105, Ryhmäkeskus pinta FE Surface

R10041 RKM560P-IT/0,24, Data-asennuskotelo FE Surface

R10022 RKP48P-IT, Data-asennuskotelo - Surface

R10079 TPK-M, Työpaikkakeskus FE Surface

R10156 RKV48, Ryhmäkeskus pinta Surface

RKV48, Ryhmäkeskus pinta

RKV

The RKV group electric centres are appropriate for use as a lighting, heating or group electric centre in bathrooms. The plastic cabinets, which are classified according to IP54, are equipped with several feed-through holes that can be opened. The delivery includes a set of seals. If necessary, the cabinets can be combined with each other with an optional combination kit.

Ue (V): 230/400
IP: 54
Icw: <5 kA
Asennus: Surface
Väri: RAL7035

R10156 main diagram PDF

R10156 main diagram DWG

R10098 TPK-S, Työpaikkakeskus HST Surface

R10094 TPK-L, Työpaikkakeskus RST Surface

R10050 RKM1120P/147, Ryhmäkeskus pinta FE Surface

R10061 RKS580U/42, Ryhmäkeskus uppo FE

RKS580U/42, Ryhmäkeskus uppo FE

RKS

Electrical centres in the RKS series are best suited for small residences and apartments. The models have been specifically designed for smaller renovation sites where space is at a minimum. The electric centres are made from hot galvanised steel plate that has been painted white. We also have data cabinets available in the same RKS series for separate installation. Available for both surface and flush mounting. In the surface-mounted model, the rear section of the cabinet is open for cabling through the bottom.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 352 x 548
Väri: RAL9010

R10061 main diagram PDF

R10061 main diagram DWG

R10047 RKM840P-IT/0,24, Data-asennuskotelo FE - Surface

RKM840P-IT/0,24, Data-asennuskotelo FE

RKM

RKM data cabinets are suitable for smaller apartments up to detached houses. The centers are made of white painted hot-dip galvanized steel sheet. The same RKM series also includes group centers for separate installation.

Available both as surface-mounted and flush-mounted. The surface-mounted model includes the necessary flanges and a fixed back panel with a large blanking plate. When flush-mounted, the center projects only 4mm above the wall surface!

Ue (V): 230/400
In (A): -
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10047 main diagram PDF

R10047 main diagram DWG

R10021 RKP36P, Ryhmäkeskus pinta - Surface

R10160 ITP840P/40/0,24, Ryhmäkeskus-data pinta FE Surface

ITP840P/40/0,24, Ryhmäkeskus-data pinta FE

ITP

In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10160 main diagram PDF

R10160 main diagram DWG

R10001 ITK840U/36/0,12, Ryhmäkeskus-data uppo FE

ITK840U/36/0,12, Ryhmäkeskus-data uppo FE

ITK

The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit (only for a right-hand door). The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting.

Väri: RAL9010
Ue (V): 230/400
IP: 20
Icw: <5kA
Materiaali: Ku-Si

R10001 main diagram PDF

R10001 main diagram DWG

R10157 RKS750P/22, Mittauskeskus pinta FE Surface

RKS750P/22, Mittauskeskus pinta FE

RKS

The RKS series distribution center is best suited for smaller apartments and residences. These models are specifically designed for tight renovation sites. The centers are made of white painted, hot-dip galvanized steel sheet. The RKS series also includes Data enclosures available for separate installation. Available in both surface-mounted and recessed versions. The surface-mounted model features an open back for cable routing through the bottom.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Asennus: Surface
Väri: RAL9010

R10157 main diagram PDF

R10157 main diagram DWG

R10065 RKS750U-IT/0,12, Data-asennuskotelo FE -

RKS750U-IT/0,12, Data-asennuskotelo FE

RKS

The RKS series distribution center is best suited for smaller apartments and accommodations. The models are specifically designed for tight renovation projects. The centers are made from white painted hot-dip galvanized steel sheet. Group centers for separate installation are also available in the same RKS series.

Available in both surface-mounted and flush-mounted versions. The surface-mounted model features an open back panel to allow for cabling through the bottom.

Ue (V): 230/400
In (A): -
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 237 x 714
Väri: RAL9010

R10065 main diagram PDF

R10065 main diagram DWG

R10080 TPK-L, Työpaikkakeskus FE Surface

R10063 RKS750U/68, Ryhmäkeskus uppo FE

RKS750U/68, Ryhmäkeskus uppo FE

RKS

Electrical centres in the RKS series are best suited for small residences and apartments. The models have been specifically designed for smaller renovation sites where space is at a minimum. The electric centres are made from hot galvanised steel plate that has been painted white. We also have data cabinets available in the same RKS series for separate installation. Available for both surface and flush mounting. In the surface-mounted model, the rear section of the cabinet is open for cabling through the bottom.

Ue (V): 230/400
IP: 20
Icw: <5 kA
Materiaali: Ku-Si
Upotusaukko (LxK): 237 x 714
Väri: RAL9010

R10063 main diagram PDF

R10063 main diagram DWG

R10051 RKM1120U/147, Ryhmäkeskus uppo FE

R10037 RKM420P-IT, Data-asennuskotelo FE - Surface

R10003 ITK1120U/48/0,12, Ryhmäkeskus-data uppo FE

ITK1120U/48/0,12, Ryhmäkeskus-data uppo FE

ITK

The ITK1120 group centers are suitable for renovation. The open back allows for easy connectivity, even for cables entering from the bottom. The cabinet can be installed either vertically or horizontally. For horizontal installation, we recommend an optional door holder kit (for right-handed doors).

Extensive IT room furnishing options meet needs for various applications. Available in both surface-mounted and flush-mounted versions.

Upotusaukko (LxK): 350 x 1090
Väri: RAL9010
Ue (V): 230-400
IP: 20
Icw: <5kW
Materiaali: Ku-Si

R10003 main diagram PDF

R10003 main diagram DWG