Data cabinets
Products in total: 3
Data cabinets are suitable for use from the smallest apartments to large detached houses. The RKM and RKS data cabinets are made from hot galvanised steel plate that has been painted white. The RKP data cabinets are made of white plastic. The IT space can be equipped with a wide variety of fittings, which enables several different uses. All data cabinets are available for both surface and flush mounting.
Name
Data-asennuskotelo FE RKS500P-IT
In0, 270x500x102
Product Card Main diagram.pdf Main diagram.dwg
The RKS series distribution center is best suited for smaller apartments and units. The models are specifically designed for tight renovation sites. The centers are made from white painted, hot-dip galvanized steel sheet. The RKS series also includes group centers for separate installation.
Available in both surface-mounted and flush-mounted versions. In the surface-mounted model, the back of the enclosure is open to allow for cabling through the base.
| Electrical number | 3312416 |
| Ue (V) | 230/400 |
| IP | 20C |
| fn | |
| Icw | <5kA |
| Material | Ku-Si |
| RJ -connector | 12x(17*18) + 14x(15*19,5) |
| Installation | Surface |
| Väri | RAL9016 |
Data-asennuskotelo FE RKM560P-IT/0,24
In0, 500x560x90
Product Card Main diagram.pdf Main diagram.dwg
RKM data cabinets are suitable for everything from smaller apartments to detached houses. The centers are made from white painted, hot-dip galvanized steel sheet. The same RKM series also offers group centers for separate installation.
The surface-mounted model includes the necessary feed-through flanges and a fixed backplate with a large feed-through blank.
| Electrical number | 3312421 |
| Ue (V) | 230/400 |
| In (A) | - |
| IP | 20 |
| fn | |
| Icw | <5 kA |
| Material | Ku-Si |
| Main switch (A) | - |
| Breaker 1-pole C6 | - |
| Breaker 1-pole B10 | - |
| Breaker 1-pole C10 | - |
| Breaker 1-pole B16 | - |
| Breaker 1-pole C16 | - |
| Breaker 1-pole C20 | - |
| Breaker 3-pole C16 | - |
| - | |
| - | |
| - | |
| RJ -connector | 14x(15*20),12x(17*18),14x(15*19,5) |
| Installation | Surface |
| Väri | RAL9010 |
Data-asennuskotelo FE ITP700-IT/0,24
In0, 500x700x99
Product Card Main diagram.pdf Main diagram.dwg
The ITP data cabinet is suitable for smaller apartments to single-family homes. The centers are made of white painted hot-dip galvanized steel sheet.
The surface/recessed model includes the necessary penetration flanges and a fixed back plate. Installation depth only 79mm. Compatible with the SMK series.
| Electrical number | 3312426 |
| Ue (V) | 230/400 |
| In (A) | - |
| IP | 20 |
| fn | |
| Icw | <5 kA |
| Material | Ku-Si |
| Main switch (A) | - |
| Breaker 1-pole C6 | - |
| Breaker 1-pole B10 | - |
| Breaker 1-pole C10 | - |
| Breaker 1-pole B16 | - |
| Breaker 1-pole C16 | - |
| Breaker 1-pole C20 | - |
| Breaker 3-pole C16 | - |
| - | |
| - | |
| - | |
| RJ -connector | 22x(15x19,5) + 18x(17x18) |
| Installation | Pinta/Uppo |
| Väri | RAL9010 |
