Data centres
Products in total: 4
The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit.
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom.
The IT space can be equipped with a wide variety of fittings, which enables several different uses. All data centres are available for both surface and flush mounting.
Name
Ryhmäkeskus-data pinta FE ITK840P-18J2V
In25, 2x4P VVSK, 385x850x110
Product Card Main diagram.pdf Main diagram.dwg
The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit (only for a right-hand door). The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting.
| Electrical number | 3312418 |
| Ue (V) | 230/400 |
| In (A) | 25 |
| IP | 20 |
| fn | |
| Icw | <5kA |
| Material | Cu-Zn |
| Main switch (A) | 40 |
| Breaker 1-pole C10 | 9 |
| Breaker 1-pole C16 | 9 |
| 2 | |
| Reserved (mod) | 7 |
| RJ -connector | 12x(15*20),10x(17*18),12x(15*19,5) |
| Installation | Surface |
| Väri | RAL9010 |
Ryhmäkeskus-data pinta FE RKS1000P-19J2V-IT
In25, 2x4P VVSK, 270x1000x102
Product Card Main diagram.pdf Main diagram.dwg
The RKS series center is best suited for smaller apartments and flats. The models are specifically designed for tight renovation sites. The centers are made from white-painted hot-dip galvanized steel sheet. In the surface-mounted model, the back of the enclosure is open to allow for cabling through the bottom.
| Electrical number | 3312419 |
| Ue (V) | 230/400 |
| In (A) | 25 |
| IP | 20C |
| fn | |
| Icw | <5kA |
| Material | Cu-Zn |
| Main switch (A) | 40 |
| Breaker 1-pole C10 | 9 |
| Breaker 1-pole C16 | 10 |
| 2 | |
| Reserved (mod) | 7 |
| RJ -connector | 12x(17*18) + 14x(15*19,5) |
| Installation | Surface |
| Väri | RAL9016 |
ITP980U/60, Data group centres
IT 0,24m2
Product Card Main diagram.pdf Main diagram.dwg
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
| Electrical number | 3312424 |
| Ue (V) | 230/400 |
| In (A) | 25 |
| IP | 20C |
| fn | |
| Icw | <5kA |
| Material | Ku-Si |
| Main switch (A) | 40 |
| Breaker 1-pole C6 | - |
| Breaker 1-pole B10 | - |
| Breaker 1-pole C10 | 9 |
| Breaker 1-pole B16 | - |
| Breaker 1-pole C16 | 12 |
| Breaker 1-pole C20 | - |
| Breaker 3-pole C16 | - |
| 2 | |
| - | |
| - | |
| Reserved (mod) | 9 |
| RJ -connector | 12x(17*18) + 14x(15*19,5) |
| Installation | Uppo tai pinta |
| Väri | RAL9010 |
ITP980U/60, Data group centres
IT 0,24m2
Product Card Main diagram.pdf Main diagram.dwg
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
| Electrical number | 3312425 |
| Ue (V) | 230/400 |
| In (A) | 50 |
| IP | 20C |
| fn | |
| Icw | <5kA |
| Material | Ku-Si |
| Main switch (A) | 63 |
| Breaker 1-pole C6 | - |
| Breaker 1-pole B10 | 6 |
| Breaker 1-pole C10 | 12 |
| Breaker 1-pole B16 | 6 |
| Breaker 1-pole C16 | 12 |
| Breaker 1-pole C20 | - |
| Breaker 3-pole C16 | - |
| 4 | |
| - | |
| - | |
| Reserved (mod) | 21 |
| RJ -connector | 18x(17*18) + 22x(15*19,5) |
| Installation | Pinta / Uppo |
| Väri | RAL9010 |
