Custom data centres
Products in total: 27
The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit.
In the ITV data group centres, the IT and electricity distribution spaces are located side-by-side. This model allows cables for both spaces to be fed to their own space from both above and below the centre.
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom.
The IT space can be equipped with a wide variety of fittings, which enables several different uses. All data centres are available for both surface and flush mounting.
-
AK10029
ITP980U/60, Data group centres
IT 0,24m2
-
Uppo/Pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Uppo/Pinta
-
R10001
ITK840U/36, Data group centres
IT 0,12m2
ITK840U/36, Data group centres
IT 0,12m2
The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit (only for a right-hand door). The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting.
- Ue (V)
- 230/400
- IP
- 20
- fn
- Icw
- <5kA
- Material
- Ku-Si
- RJ -connector
- Installation
-
R10003
ITK1120U/48/0,12, Ryhmäkeskus-data uppo FE
Asiakaskohtainen malli
-
- Ue (V)
- 230-400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5kW
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 350 x 1090
- RJ -connector
- Installation
-
R10011
ITP1400U/84, Data group centres
IT 0,24m2
-
ITP1400U/84, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 480 x 1376
- RJ -connector
- Installation
-
R10158
RKS750U/22/0,12, Ryhmäkeskus-data uppo FE
Asiakaskohtainen malli
-
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 237 x 714
- Installation
-
R10159
RKS750P/22/0,12, Ryhmäkeskus-data pinta FE
Asiakaskohtainen malli
-
Surface
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- Installation
- Surface
-
R10160
ITP840P/40, Data group centres
IT 0,24m2
-
Surface
ITP840P/40, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface
-
R10161
ITP840U/40, Data group centres
IT 0,24m2
-
ITP840U/40, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 481 x 817
- RJ -connector
- Installation
-
R10162
ITV840P/36/0,24, Ryhmäkeskus-data pinta FE
Asiakaskohtainen malli
-
Surface
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface
-
R10163
ITV840U/36/0,24, Ryhmäkeskus-data uppo FE
Asiakaskohtainen malli
-
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 481 x 817
- RJ -connector
- Vaittavissa
- Installation
-
R10164
ITP1120P/80, Data group centres
IT 0,24m2
-
Surface
ITP1120P/80, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface
-
R10165
ITP1120U/80, Data group centres
IT 0,24m2
-
ITP1120U/80, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 481 x 1096
- RJ -connector
- Installation
-
R10166
ITK1120U/36, Data group centres
IT 0,24m2
-
ITK1120U/36, Data group centres
IT 0,24m2
The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit (only for a right-hand door). The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting.
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 350 x 1090
- RJ -connector
- Installation
-
R10167
ITK1120P/36, Data group centres
IT 0,24m2
-
Surface
ITK1120P/36, Data group centres
IT 0,24m2
The ITK data group centres are suited to renovation and new construction. The open back enables easy connectivity for cables fed through the bottom. The centre can be installed both vertically and horizontally. For horizontal installation, we recommend an optional door holder kit (only for a right-hand door). The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting.
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface
-
R10179
OKK1500PU/135, Ryhmäkeskus-data pinta FE
Asiakaskohtainen malli
-
Surface/Flush
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 30
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface/Flush
-
R10205
OKK1500PU/159, Ryhmäkeskus pinta FE
Asiakaskohtainen malli
-
Surface/Flush
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 30
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface/Flush
-
R10209
OKK2000PU/207, Ryhmäkeskus-data pinta FE
Asiakaskohtainen malli
-
Surface/Flush
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 30
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface/Flush
-
R10228
ITP840U/42/0,24, Ryhmäkeskus-data uppo FE
70mm matalaan seinärakenteeseen
-
ITP840U/42/0,24, Ryhmäkeskus-data uppo FE
70mm matalaan seinärakenteeseen
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 481 x 817
- RJ -connector
- Installation
-
R10230
ITP1120U/84/0,24, Ryhmäkeskus-data uppo FE
70mm matalaan seinärakenteeseen
-
ITP1120U/84/0,24, Ryhmäkeskus-data uppo FE
70mm matalaan seinärakenteeseen
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 481 x 1096
- RJ -connector
- Installation
-
R10236
ITK840P/36/0,12, Ryhmäkeskus-data pinta FE
Asiakaskohtainen malli
-
Surface
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface
-
R10237
ITK1120P/48/0,12, Ryhmäkeskus-data pinta FE
Asiakaskohtainen malli
-
Surface
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface
-
R10243
ITK1120U/36/0,24/90mm, Ryhmäkeskus-data uppo FE
Asiakaskohtainen malli
-
ITK1120U/36/0,24/90mm, Ryhmäkeskus-data uppo FE
Asiakaskohtainen malli
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5 kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- 350 x 1090
- RJ -connector
- Installation
-
R10261
ITP1400P/84, Data group centres
IT 0,24m2
-
Surface
ITP1400P/84, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Surface
-
R10267
ITP980U/60, Data group centres
IT 0,24m2
-
Uppo/Pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Uppo/Pinta
-
R10268
ITP980U/60, Data group centres
IT 0,24m2
-
Uppo tai pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Uppo tai pinta
-
R10291
ITP980U/60, Data group centres
IT 0,24m2
-
Uppo/Pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Uppo/Pinta
-
R10320
ITP980U/60, Data group centres
IT 0,24m2
-
Uppo/Pinta
ITP980U/60, Data group centres
IT 0,24m2
In the ITP data group centres, the IT and electricity distribution spaces are located on top of each other. The side of the centre has a cable chute by the IT space for the wiring of the electricity distribution section. This makes it easy to connect a feed cable from the bottom. The IT space can be equipped with a wide variety of fittings, which enable several different uses. Available for both surface and flush mounting. The surface-mounted model contains the necessary feed-through flanges and a fixed back plate. When flush-mounted, the centre only rises 4mm above the wall surface!
- Ue (V)
- 230/400
- In (A)
- -
- IP
- 20C
- fn
- Icw
- <5kA
- Material
- Ku-Si
- Main switch (A)
- -
- Breaker 1-pole C6
- -
- Breaker 1-pole B10
- -
- Breaker 1-pole C10
- -
- Breaker 1-pole B16
- -
- Breaker 1-pole C16
- -
- Breaker 1-pole C20
- -
- Breaker 3-pole C16
- -
- -
- -
- -
- RJ -connector
- Installation
- Uppo/Pinta